NEC Univerge SV8500 Operation And Maintenance Manual page 316

7
OPTN data
b7 b3
8
Tested Route number
b7 b6 b5 b4 b3
When Logical Routes are assigned, Logical Route Numbers are displayed here.
Note:
9 OPRT data
b7 b6 b5 b4 b3
When Logical Routes are assigned, Logical Route Numbers are displayed here.
Note:
10 (This data is not for Ringing Signal
Test)
b7 b6 b5 b4 b3
11
Digit of Dialed Number (for test
b7 b4 b3
12
Dialed Number (for test)
b7 b6 b5 b4 b3
b0-b3: Tenant (Over 15)
b2 b1 b0
b0-b5: Route (1-63) Note
b6:
b2 b1 b0
b7:
b0-b7: Route(
b2 b1 b0
b0-b7: Trunk number for Outgoing trunk test, ORT/IRT Test, Sender Test
b2 b1 b0
)
b0-b4: Dialed number digit sent by the test Trunk/Sender
b2 b1 b0
b2 b1 b0
OP
9
0/1 = Data in OPRT( ) is invalid/valid
AC
0/1 = Internal trunk/External trunk
> =
64) Note
and Digital Conference test
Tone Slot number for Tone Test
0 = DT 1 = SPDT
2 = RBT 3 = CRBT, CWT
4 = BT 5 = RBT
6 = SST, WT 7 = SDT
8 = TRG 9 = SDTT
10 = CWRBT 14 = MSC
or
Dialed Number digit received by the test Register
– 269 –
CHAPTER 3 System Messages