NEC Univerge SV8500 Operation And Maintenance Manual page 222

Major
Factors
Item
(Hex)
00 Not used
01 before registra-
tion/
before DRS01
(Initial Setting
Request)
02
during registra-
tion/before DRS
03 (Signaling
Path Set
Response)
03
after registration/
during initializa-
tion
04
during call pro-
cess
05 during partial ini-
tialization
06
diagnosis com-
mand not
received/Keep-
alive NG
07 Software Reset Request
08 DHCP lease is expired
09
Configuration mode is
ended
(DtermIP only)
0A Reset Request by PROTI-
MIS (DtermIP only)
0B - Not used
Table 2-2 Detailed Information of Reset Factors
DtermIP (Proprietary Protocol)
-
During "DHCP Connecting...."
indication, the terminal was placed in
configuration mode and Save or cancel
was performed.
During "DRS Connecting...."
indication, the terminal was placed in
configuration mode and Save or cancel
was performed.
-
Reset occurred because of timeout
while waiting to receive TIR PAW.
-
Reset occurred after "Network Busy"
Reset was requested by the system/
Reset occurred after receiving All
ClearPAW direction.
Reset occurred after DHCP Lease
Expiration.
After placing in Configuration Mode
from clock indication, save or cancel
was performed in the mode.
Terminal reset was requested by PCPro
commands such as AKYD, ADKS or
MBST.
-
– 175 –
CHAPTER 2 Operations of SV8500 Server
Sub Factors
DtermIP (SIP)/Soft Phone (SIP)
-
Failure before registration such as fail-
ure while acquiring DHCP address,
DHCP server connection timeout
Failure during registration such as
response wait timeover, receiving
abnormal response
Failure immediately after registration
completion such as 200 OK Receive
timeout for initial SUBSCRIBE and no
reception of initial SUBSCRIBE from
the server
Not used
Not used
Response wait timeover for SUB-
SCRIBE or NOTIFY/SUBSCRIBE is
expired.
Reset was requested by the server.
DHCP Lease Expiration or NACK
Reception
Configuration menu is ended.
Not used
-