D Tsw Write Failure - NEC Univerge SV8500 Operation And Maintenance Manual

1-D: TSW Write Failure
Default Alarm
MN
This message displays when the link information cannot be written into the switch memory of the TSW card in
one of the dual systems.
1: XXXX XXXX XXXX XXXX 2: 0000 0000 0000 0000 3: 0000 0000 0000 0000
1 2
4: 0000 0000 0000 0000 5: 0000 0000 0000 0000 6: 0000 0000 0000 0000
7: 0000 0000 0000 0000 8: 0000 0000 0000 0000 9: 0000 0000 0000 0000
1
TSW system in which a fault is
detected
b7
2
Status at the time of fault detection
b7 b6
3
Data Analyzed by NEC Engineers
Reference: See Chapter 5
STBY Side Has Become
procedure.
Default Grade
2
3
b0: 0/1 = TSW 0/TSW 1
b0
b0: 0/1 = TSW 0/TSW 1
b6: 0/1 = Speech Path ACT status
b0
TSW System 0 is ACT/TSW System 1 is ACT
Speech Path System Fault - Fault Related to
Fault, Control System Fault - Fault Occurs Intermittently on ACT side
Grade Modified
– 220 –
CHAPTER 3 System Messages
Lamp Modified
Speech, Speech Path System Fault -
for the repair