Dlss Display Of Lockout Station - Number - NEC Univerge SV8500 Operation And Maintenance Manual

DLSS: Display of Lockout Station - Number
1. Functional Outline
This command is used to print the stations in lockout state by station number.
2. Parameters
Input data
Type:
TN:
Start STN:
End STN:
The parameter is valid only when TYPE=2.
Note 1:
The parameter is valid only when TYPE=3.
Note 2:
Output data
CNT:
TN
STN
LENS
Type of Printout (1-3)
1=Printout of all lockout stations
2=Printout of lockout stations by tenant
3=Printout of lockout stations within a specified range of station number.
Tenant Number ,
Note 1
Maximum six digits
Note 2
Maximum six digits
Note 2
Count
Tenant Number
Physical Station Number
Line Equipment Number
CHAPTER 7
Note 2
– 818 –
Maintenance Commands