NEC Univerge SV8500 Operation And Maintenance Manual page 480

8
When =06 (PMS)
Device Number of error-detected PC (HEX)
9
b7 b6 b5 b4 b3
Error Kind (ERRK)
10
b7 b6 b5 b4 b3
This information is printed when PMS is used.
Note:
8
When =09 (CS REPORT)
Device Number of error-detected Client PC (HEX)
9
b7 b6 b5 b4 b3
Error Kind (ERRK)
10
b7 b6 b5 b4 b3
This information is printed when PMS is used.
Note:
b2 b1 b0
b2 b1 b0
b2 b1 b0
b2 b1 b0
b0-b7: Device Number of error-detected Client PC. If the
Machine is not determined, FF is output.
b0-b7: Error Kind (HEX)
01: SEND Execution error
02: RECEIVE Execution error
05: System Data is not assigned
b0-b7: (HEX)
Device number for external LANs whose fault has
occurred. Non-specified equipment indicates "00".
b0-b7: Error Kind (HEX)
01=SEND Execution Error
02=RECEIVE Execution Error
03=SEND Execution Count Over
05=System data is not assigned
06=Time Over
07=Parity Error
08=Connection Error
09=Invalid Device Error
0B=Client Forced Disconnection
0D=Identical Data Consecutive Receive
0E=Device number is same.
10=Process Stop
11 =Process Activation Error
12 =DB related error when receiving call data
13 =DB related error when compiling call data
14 =DB related error when editing reports
15 =DB Capacity Alarm
16 =Resource Error of HD
– 433 –
CHAPTER 3 System Messages