Mbrt_Lr Make-Busy Of Route - Logical Route Number - NEC Univerge SV8500 Operation And Maintenance Manual

MBRT_LR:Make-Busy of Route - Logical Route Number
1. Functional Outline
This command is used to assign Idle/Busy status of all the trunks in the logical route designated. Route number
of the MBRT command can be assigned by using logical route.
When logging in to the NCN (Network Control Node), the data of other LN (Local Node) can be changed.
Note:
If logging in to a LN, only the DM of self-Node can be changed by this command.
2. Parameters
Input data
LGRT:
MB:
Output Data
FPC: Fusion Point Code [1-253] Note 2
RT: External Route Number
Prior to this command, logical route number must be allocated by using the ALRTN command.
Note 1:
After entering attributes in LGRT and MB then clicking Write button, this parameter becomes avail-
Note 2:
able.
Logical route number allocated to the external/internal route. Refer to the MBRT com-
mand as to the Internal route number and its meaning. Note 1
Make-Busy Information
Make Idle
Make Busy
CHAPTER 7
– 881 –
Maintenance Commands