W Lan Interface Release Report - NEC Univerge SV8500 Operation And Maintenance Manual

26-W: LAN Interface Release Report
Default Alarm
NON
This message displays when the LAN Interface Connection Failure, detected in System Message [26-V],
recovers. The message displays when the LAN Interface Connection Failure is restored. The first data is
normally sent/received by the recovered application equipment.
TCP/IP
1: XXXX XXXX XXXX 00XX 2: XXXX XX00 0000 0000 3: 0000 0000 0000 0000
1 2 3 4
4: 0000 0000 0000 0000 5: 0000 0000 0000 0000 6: 0000 0000 0000 0000
7: 0000 0000 0000 0000 8: 0000 0000 0000 0000 9: 0000 0000 0000 0000
4
1
- IP Address for external equipment in which error has been detected. (HEX)
b7 b6 b5 b4 b3
6
5
, Socket number (Used Socket number) (HEX) - Socket Number used by application whose failure has been
received.
b7 b6 b5 b4 b3
7
Error Code (TCP/IP Error Code) (HEX)See Table 3-1.
b7 b6 b5 b4 b3
Application Type
8
b7 b6 b5 b4 b3
Default Grade
7
5 6 8 9
b2 b1 b0
b2 b1 b0
b2 b1 b0
b2 b1 b0
Grade Modified
Application
10
b0-b7: (HEX)
01=SUPER SERVER
02=MAT
03=SMDR
04=MCI
05=OAI
06=PMS
07=MIS
08=NMS
09=CS Report
– 435 –
CHAPTER 3 System Messages
Lamp Modified