NEC Univerge SV8500 Operation And Maintenance Manual page 954

Hide thumbs Also See for Univerge SV8500:
Table of Contents

Advertisement

The system initialize is executed for STBY side by loading the program and the office data from the CF
card to MEM.
<Standby> Restart
The system initialize is executed for STBY side by restarting the system.
<Standby> Shutdown
The system initialize is executed for STBY side by shutting the system down.
This parameter is only available for North America.
Note 1:
< For Redundant Data Memory Backup on Individual Hard Drive >
Click Option in the menu bar, and select Drive Select. A window, with the following parameters, appears.
On the window, designate the affected drive:
Program:
Drive A (default setting)
Drive D
Office Data:
Drive B (default setting)
Drive C
This data must be specified only when using the Redundant Data Memory Backup on an Individual
Note 2:
Hard Drive function.
Buttons
Execute: Execute the specified system initialization.
Exit: Exit this command.
Note 1
Note 1
CHAPTER 7
Note 2
– 907 –
Maintenance Commands

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Fp85-104 s1e

Table of Contents