NEC Univerge SV8500 Operation And Maintenance Manual page 948

2=Busy
3=Lockout
4=Make Busy
5=Call Now (PHS system only)
Information: Information of the connected party
This parameter appears only when STATUS=2.
Note:
CNT: Count
FPC: Fusion Point Code (1-253)
LENS: Line Equipment Number
TN: Tenant Number
STN: Station Number
RT: External/Internal Route Number
TK: Trunk Number (1-255)
C_RT: Connection Route Number (1-1023)
C_TK: Connection Trunk Number (1-4095)
PCN: PHS Community Number (1-1024)
ERN: Area Number (1-32)
GRN: Group Number (1-32)
CSN: CS Number (1-32)
INTERVAL: Interval time of scan (seconds) (30-180)
RESULT: After release result (1, 2)
1=Release complete
2=Release executing
Details of a color:
Not Assigned= GRAY (Status: 0)
Idle, Make Busy= WHITE (Status: 1)
Busy = WHITE (Status: 2)
Lockout = WHITE (Status: 3)
Make Busy = GRAY (Status: 4)
Call Now = GRAY (Status: 5)
Release complete = GREEN (Result: 1)
Release executing = YELLOW (Result: 2)
The Numbers shown in brackets are used for printout data.
Note:
RESULT indicates the result of data entries.
STATUS indicates the trunk status.
CHAPTER 7
Note
– 901 –
Maintenance Commands