NEC Univerge SV8500 Operation And Maintenance Manual page 448

6
OPTN data
b7 b3
Note: This data displays when the Tenant number of the calling station is larger than 15, and b7 of
as "1" (otherwise, "0" displays at any time). While the four-bit data of
Tenant 1-15, this OPTN data provides a supportive role to cover Tenant number ranging from 16 to 255.
Use the following method to analyze the data:
Tenant number of Calling Station (1-15)
Tenant number of Calling Station (16-255)
7
OG route number (HEX)
b7 b6 b5 b4 b3
8
OPRT data
b7 b3
This data displays when the OG Route number is larger than 63, and b6 of
Note:
"0" displays at any time). While the six-bit data of
data provides a supportive role to cover Route number larger than 63. Use the following method to analyze
the data:
OG Route (1-63)
OG Route (64 or larger)
b0-b3: OPTN data Note
b2 b1 b0
= 0
OPTN data (0: fixed)
=
OPTN data (variable)
b7:
b2 b1 b0
b6:
b0-b5: OG route number
b0-b3: OPRT data Note
b2 b1 b0
= 0 0
OPTN data (0:fixed)
= OPTN data
OPTN data (variable)
0 0 0 Tenant No.
b0 - b3 of
OPTN data Tenant No.
b0 - b3 of
AC data
0/1=Internal trunk/External trunk
OP data (0/1)
8
When OPRT data of is valid, "1" displays,
• b6=0 Route number <64
• b6=1 63<Route number
7
is self-sufficient in verifying the Route 1-63, this OPRT
0 0 OG Route No.
b0 - b5 of
OG Route No.
b0 - b5 of
– 401 –
CHAPTER 3 System Messages
5
is self-sufficient in verifying
5
5
Refer to the OPTN
8
data of
7
displays as "1" (otherwise,
7
7
5
displays