NEC Univerge SV8500 Operation And Maintenance Manual page 115

(none) login: root
root@(none):~#
STEP 7 Enter the following command to mount CD/DVD drive.
When the system is FP85-104 S1 Issue 5, this command entry is not required.
Note:
(root@(none):~#
(root@(none):~# mount /dev/cdroms/cdrom0 /cdrom
STEP 8 The following will be displayed.
(root@(none):~# mount /dev/cdroms/cdrom0 /cdrom
mount: block device /dev/ide/................/cd is write-protected,
mounting read-only
(root@(none):~#
STEP 9 Insert the CF card to be initialized to the PCMCIA card slot of the PC.
STEP 10 Execute the install command.
• Press "y" to the execution confirmation message for installation.
• Press the Enter key.
• Installation starts. (It takes approximately 20 minutes.)
root@(none):~#
root@(none):~# INSTALLCF
......
......
......
do you continue the installation?(y/n): y
When the system is FP85-104 S1 Issue 4 or earlier, enter the command as below.
Note:
root@(none):~#
root@(none):~# /cdrom/INSTALLCF
......
......
......
do you continue the installation?(y/n): y
STEP 11 "Installation finish!" is displayed.
• Remove the CF card.
STEP 12 Execute halt command.
CHAPTER 2
Login as "root".
Enter "y", and press the Enter key.
Enter "y", and press the Enter key.
– 68 –
Operations of SV8500 Server