Cmwl_T Control Message Waiting Lamps – Telephone Number - NEC Univerge SV8500 Operation And Maintenance Manual

CMWL_T: Control Message Waiting Lamps – Telephone Number
1. Functional Outline
This command is used to control/display the Message Waiting Lamp's ON/OFF status, by using Telephone
numbers. When the station is a Dterm, this command can also be used to control the Message Waiting Lamp
Display. This command is only available at NCN (for FCCS network).
2. Parameters
Input Data
TYPE:
UGN:
TELN:
LENS:
MWLAMP:
MCI:
ATT:
STA:
VMM:
This parameter is valid when TYPE =1 is selected.
Note 1:
This parameter is valid when TYPE =2 is selected.
Note 2:
Output Data
FPC:
TN:
STN:
These parameters are for display only.
Note 3:
Buttons
Get:
Designation by Telephone Number/Designation by LEN
User Group Number
Telephone Number (maximum 16 digits)
Line Equipment Number
MW Lamp Status OFF/ON
Message Center MW Status OFF/ON
Attendant Console MW Status OFF/ON
Station MW Status OFF/ON
Voice Mail Module MW Status OFF/ON
Fusion Point Code (1-253)
Tenant Number
Physical Station Number
(a maximum of five digits for a Business system, and six digits for a Hotel system)
Get information on the MW status.
CHAPTER 7
Note 1
Note 1
Note 2
Note 3
Note 3
– 750 –
Maintenance Commands