Dcon Display Of Connection Status - NEC Univerge SV8500 Operation And Maintenance Manual

DCON: Display of Connection Status
1. Functional Outline
This command displays the connection status of the station and trunks. If the specified station or trunk is busy,
the connected party is displayed. The activation of this command does not affect calls in progress. Encryption
status for voice data is displayed in SEC as follows:
O: encrypted, X: not encrypted, blank: the system or the terminal is not available for encryption.
Data in SEC is displayed on a LENS basis. For more detailed information on SEC, see
Note 1:
ship between SEC value and Encryption
2. Parameters
Input data
Type:
TN:
STN:
RT:
TK:
LEN:
C_RT:
C_TK:
This data entry is valid when TYPE=1.
Note 2:
This data entry is valid when TYPE=2.
Note 3:
This data entry is valid when TYPE=3.
Note 4:
This data entry is valid when TYPE=4.
Note 5:
Kind of Connection Status (1-4)
1=Station of Connection Status
2=Trunk of Connection Status
3=LENS of Connection Status
4=Connection Trunk of Connection Status (FCCS Network)
Tenant Number
Note 2
Maximum number of digits is five for Business system, and six for Hotel system.
Note 2
Route Number
Note 3
Trunk Number
Note 3
Line Equipment Number
Connection Route Number (1-1023)
Connection Trunk Number (1-4095)
CHAPTER 7
on the next page.
Note 4
Note 5
Note 5
– 780 –
Maintenance Commands
Note 1
The Relation-