Rlst_T Release Of Station/Trunk – Telephone Number - NEC Univerge SV8500 Operation And Maintenance Manual

RLST_T: Release of Station/Trunk – Telephone Number
1. Functional Outline
This command is used to release a station/trunk, by using Telephone Numbers. This command is only available
at NCN (for FCCS network).
2. Parameters
Input Data
TYPE:
Telephone Number
Trunk
LENS
Connection Trunk
UGN: User Group Number
TELN: Telephone Number (maximum 16 digits)
RT: External/Internal Route Number
TK: Trunk Number
LENS: Line Equipment Number
C_RT: Connection Route Number (1-1023)
C_TK: Connection Trunk Number (1-4095)
This parameter is valid when Telephone Number is designated in the TYPE selection list box.
Note 1:
This parameter is valid when Trunk is designated in the TYPE selection list box.
Note 2:
Note 3: This parameter is valid when LENS is designated in the TYPE selection list box.
This parameter is valid when Connection Trunk is designated in the TYPE selection list box.
Note 4:
Output Data
FPC: Fusion Point Code (1-253)
TN: Tenant Number
STN: Physical Station Number (a maximum of five digits for a Business system, and six digits for a Hotel
system)
Note 1
Note 1
CHAPTER 7
Note 1
Note 1
Note 2
Note 2
Note 3
Note 4
Note 4
– 902 –
Maintenance Commands