Dimg Display Information Of Media Gateway - NEC Univerge SV8500 Operation And Maintenance Manual

DIMG: Display Information of Media Gateway
1. Functional Outline
This command is used to display the information of the Media Gateway that is managed by SV8500 (PHI).
2. Parameters
Input Data
View Type:
PH LENS:
Output Data
CNT:
LENS:
FPC:
MG Type:
Status:
IP:
MAC:
SEC:
TN:
RT:
TK:
ISDN Status:
Action Mode:
Reference
For MG(PRI) (SIP), the first channel of HW assigned by AMGIL command is displayed.
Note:
Buttons
Get:
CSV File Output:
Exit:
Select the item to be displayed.
Media Gateway Information: Information of Media Gateway belonging to SV8500.
ISDN Trunk (PRI) Information:Information of MG(PRI) belonging to SV8500.
Equipment Number (Even Number, Five Digits)
Counter
Line Equipment Number Note
Fusion Point Code
Media Gateway Type
Registration Status
IP Address assigned to Media Gateway
MAC Address of Media Gateway
Encryption status for voice data [O (encrypted) / X (not encrypted) / Readout Failed /
Blank (system or terminal does not support encryption)]
Tenant Number
B-Channel Route Number of Media Gateway
Trunk Number
ISDN Status of Media Gateway
Operation Mode of Media Gateway
Reference Information
Retrieve the line information.
Output the report in CSV format.
Exit this command.
CHAPTER 7
– 797 –
Maintenance Commands