Dtf601N Display Of Connection Route Peg Count Data For Fccs Network - NEC Univerge SV8500 Operation And Maintenance Manual

DTF601N: Display of Connection Route Peg Count Data for FCCS Network
1. Functional Outline
This command is used to display the result of traffic measurement data for TYPE=18 (Connection Route Peg
Count) assigned by the ATRFN command.
2. Parameters
Traffic Data 1:
Traffic Data 2:
Traffic Data 3:
Traffic Data 5:
Traffic Data 6:
Terminal Traffic-DTF101N
Route Traffic-DTF102N
Station Peg Count-DTF103N
Attendant Peg Count-DTF104N
Route Peg Count-DTF105N
Service Peg Count-DTF201N
UCD Route Peg Count-DTF301N
UCD Group Peg Count-DTF302N
UCD Station Peg Count-DTF303N
Attendant Answer Peg Count-DTF501N
Connection Route Peg Count-DTF601N
Connection Route Traffic-DTF602N
CHAPTER 7
– 856 –
Maintenance Commands