Mbst_T Make-Busy Of Station – Telephone Number - NEC Univerge SV8500 Operation And Maintenance Manual

MBST_T: Make-Busy of Station – Telephone Number
1. Functional Outline
This command is used to assign the IDLE/BUSY status of stations, by using Telephone Numbers. This
command is only available at NCN (for FCCS network).
2. Parameters
Input Data
UGN:
TELN:
MB:
Output Data
FPC:
TN:
STN:
Note: This data is for display only.
Buttons
Get:
Set:
Exit:
User Group Number
Telephone Number (maximum 16 digits)
Make-Busy Information
Fusion Point Code (1-253)
Tenant Number
Note
Physical Station Number
(a maximum of five digits for Business system, and six digits for Hotel system)
Note
Get information on the station.
Execute the IDLE/BUSY performance.
Exit this command.
CHAPTER 7
Note
– 884 –
Maintenance Commands