Explanations On Each Item - NEC Univerge SV8500 Operation And Maintenance Manual

5.3.3

Explanations on Each Item

• Call Forwarding Data and One-Touch Speed Calling Data
The data for Call Forwarding and Speed Calling features can be saved.
You can check whether the backup has been executed properly by checking the Auto Verify Afterward
checkbox on MEM_HDD command.
Call Forwarding (All Calls, Busy, Don't Answer) and Speed Calling features are set/canceled from each
station, and the data is written on the memory of the system. Therefore, on the occasion that the memory
data is changed after the data saving, an error message is detected when "Verify HDD against MEM" is
executed.
• Wireless Call Forwarding Data
Call Forwarding data assigned on each PS can be saved in CF card.
• User Assign Key Data
Soft Key information assigned on each DtermIP can be saved in CF card.
• Number Sharing Data
Number Sharing data can be saved in CF card. Also, Dual Station Call data can be saved in CF card.
• Speed Calling Data for DtermIP
A maximum of 20 telephone numbers (40 telephone numbers when PAGE function for one-touch key
changeover is adapted) allocated to the Speed Dialing keys on Dterm and DtermIP can be saved.
There is no compatibility between Speed Calling data between Dterm and DtermIP.
Note:
• SIP Terminal Transfer Information
SIP terminal (VoWLAN Dual/VoWLAN/Standard SIP) data is backed up.
• ACD Data Memory
When taking a backup of the ACD data memory, you can see the result by using "Auto Verify Afterward"
of MEM_HDD.
The setting/deleting of the ACD data can be changed (written into the system memory) by using a MIS
Note:
or an external application. Therefore, if it is changed after taking the backup, "Verify HDD against
MEM" of MEM_HDD will end in an error.
• Soft Switch Data
Switch setting data that can be set by ASSW command is backed up.
CHAPTER 2
– 61 –
Operations of SV8500 Server