DPSW: Display Package Switch Status
1. Functional Outline
This command is used to display the following information on a Line/Trunk or Control circuit card:
When PCPro is in On-line Mode (=connected to the system)
•
Current status of each switch
•
Explanation of each switch function
When PCPro is in Off-line Mode (= not connected to the system)
•
Explanation of each switch function
When using this command, make sure that each circuit card's related database file have already been
Note 1:
installed to the PCPro. (See the FLINST command for more information.)
2. Parameters
Input Data
KIND:
•
(PCPro=) On-line Mode
•
(PCPro=) Off-line Mode
TYPE:
•
Line Trunk Package
•
Control Package
PMN:
PKG NAME:
LP:
SYSTEM:
MG:
UNIT:
Display Kind (selection)
Circuit Card Type (selection)
Port Micro Processor Number
Circuit Card Name
Local Partition Number [00-06 (even number only)]
System
0=System 0
l=System 1
Module Group Number [00-07]
Unit Number [0-3]
CHAPTER 7
Note 2
Note 2
Note 2
– 824 –
Maintenance Commands
Note 2