NEC Univerge SV8500 Operation And Maintenance Manual page 812

<For the execution of the process>
PC Port Control:
<Others>
All Select:
Auto Scroll:
By marking the checkboxes next to the numbers in the list, the individual readout data can be selected.
Note:
Output Data
No.:
Result:
TN:
STN:
LENS:
UGN (NDM):
TELN (NDM):
UGN (LDM):
TELN (LDM):
IP Address:
Connection Status:
Connection Status (LDM):Status of the PC port on the office data (Connection/Disconnection)
Buttons
Get:
Execute:
Skip:
Exit:
Select either "Connection" or "Disconnection".
Mark the checkbox when selecting all data in the list.
By marking the checkbox, the data in the list is automatically scrolled to the
end.
Each data in the list is numbered. (1-n)
Status of the system
Tenant Number (1-63)
Station Number (Up to 16 digits (0-9, *, #))
Line Equipment Numbers
User Group Number (NDM) (1-255)
Telephone Number (NDM) (Up to 16 digits (0-9, *, #))
User Group Number (LDM) (1-255)
Telephone Number (LDM) (Up to 16 digits (0-9, *, #))
IP address of Terminal (0.0.0.1 - 255.255.255.254)
Current status of the PC port (Connection/Disconnection)
Readout the data
Start the process.
Cancel the data readout or the execution of the process.
Exit this command.
– 765 –
CHAPTER 7 Maintenance Commands