C Both Tsw Write Failure - NEC Univerge SV8500 Operation And Maintenance Manual

1-C: Both TSW Write Failure
Default Alarm
MN
This message displays when the link information cannot be written into the switch memory of the TSW in both
systems.
1: XXXX XXXX XXXX XXXX 2: 0000 0000 0000 0000 3: 0000 0000 0000 0000
1 2
4: 0000 0000 0000 0000 5: 0000 0000 0000 0000 6: 0000 0000 0000 0000
7: 0000 0000 0000 0000 8: 0000 0000 0000 0000 9: 0000 0000 0000 0000
1
TSW system in which a fault is
detected
b7
2
b7 b6
3
Data Analyzed by NEC Engineers
Reference: See Speech Path System Fault - Fault Related to
Intermittently on ACT
Default Grade
2
3
b0:
b0
b0:
b6:
b0
sidefor the repair procedure.
Grade Modified
0/1 = TSW 0/TSW 1
0/1 = TSW 0/TSW 1
0/1 = Speech Path in ACT status
System 0/System 1
Speech,
– 219 –
CHAPTER 3 System Messages
Lamp Modified
Control System Fault - Fault Occurs