NEC Univerge SV8500 Operation And Maintenance Manual page 807

Database File for Batch Assignment
To draw up the database for System Phone Book data, the database file should be made under conditions below.
CPBKN_DATAFILE [CR+LF]
;
;Database File for Batch Assignment
;
;INDEX RESULT TN
0001
0002
Note 1
Note 1: Two-tab character input is required between INDEX and TN data input field because RESULT
field is not used while drawing up the database.
Note 2: Above data input is an example.
Conditions:
• The database file is drawn up with text file only. The file extension should be "*.txt".
• Data needs to be input to the file with the "tab delimited" text format.
• All data for one case should be included in a row.
• The end of a row is recognized by inputting "[CR+LF]".
• "CPBKN_DATAFILE '[CR+LF]'" needs to be input in the first row of the file by all means.
• Data for DC needs to be input to left justify.
• Data for CNT takes priority over the number of input DC. For example, only five DCs can be as-
signed if "5" is input in CNT field even though seven DCs have been already input in database.
• When "0" is input in CNT field, whole data in relevant row will be deleted.
• When ";" is input in left most part of each row, the row is regarded as comment row.
• One-tab character needs to be input between data to separate each data. However, Two-tab character
input is required between INDEX and TN data input field because RESULT field is not used while
drawing up database.
• Input data will be active only when data are input in the following order.
Sample Format of Database File
UGN NAME CNT
Abiko
63 3
255
Suzuki
63 100 20
CHAPTER 7
DC_01 DC_02 DC_03
3000 [CR+LF]
2000
1000
20001 20002 20003
Input one-tab character between data.
– 760 –
Maintenance Commands
... DC_20[CR+LF]
... 20020
[CR+LF]