NEC Univerge SV8500 Operation And Maintenance Manual page 711

• Cancelling
Figure 5-31 Line Load Control Operations on ATTCON—Cancelling
Press LOOP key.
Dial the access code for cancelling
Line Load Control.
Press CANCEL key.
(2) Key Operations on the Desk Console (DESKCON)
By the operations on the Desk Console, restriction is applied on an outgoing call from a station having SFC
in which the SFI=16 (Line Load Control) of the ASFC command is set as RES=0 (incoming calls to that
station are allowed). For restricting incoming calls from a trunk, system data ASYD, SYS 1, INDEX 59,
b0=1 should be assigned.
CHAPTER 5
(SST)
Figure 5-32 Locations of Lamps (ATTCON)
– 664 –
Operation Procedure for System with PIR
• Lamp (Figure 5-32) on control
panel lights.
• System Message [6-D] displays.
NEC
LAMP