NEC Univerge SV8500 Operation And Maintenance Manual page 17

REGULATORY NOTICE (For EU)
1. PREFACE
This manual is valid for the UNIVERGE SV8500 telephone system.
Some products described in this manual are not (yet) available for specific countries or markets. For this rea-
son, the related specifications, instructions for installation and use of these specific products are not valid for
these markets. Refer to NEC Philips for more details in case of any questions about these products.
1.1 CE Notice (European Union)
The equipment described in this manual is intended to be connected to local area networks (LAN) and supports
a wide range of peripheral equipment. Additional interfaces are available for connection to public analogue
and digital telecommunication networks which comply with:
• ETS 300 011 (PRI)
• ETS 300 012 (BRI)
• ETS 300 402 (PRI & BRI)
• ETS 300 403 (PRI & BRI)
• TBR3 :ISDN basic rate interface
• TBR4 :ISDN primary rate interface
• TBR21 :Analogue interface
To take advantage of all features of this system and the connected equipment, the country specific or network
specific features should match the supported features of the system. For an overview of the supported features,
refer to the detailed documentation that comes with this system, contact your local NEC Philips representative
or the support desk of NEC Philips Unified Solutions.
Hereby, "NEC Philips Unified Solutions", declares that this product is in compliance with the essential require-
ments and other relevant provisions of Directive 1999/5/EC.
1.2 Electromagnetic compatibility
For some of the SV8500 communication platform components the following warning is applicable:
This is a class A product.
WARNIG :
In a domestic environment this product may cause radio interference in which
case the user may be required to take adequate measures.
REGULATORY
R-8