A System Initialize With Data Load - NEC Univerge SV8500 Operation And Maintenance Manual

7-A: System Initialize With Data Load
Default Alarm
NON
This message displays after the office data is loaded and system initialization has executed.
1: XXXX XXXX XXXX XXXX 2: XXXX 0000 0000 0000 3: 0000 0000 0000 0000
1
4: 0000 0000 0000 0000 5: 0000 0000 0000 0000 6: 0000 0000 0000 0000
7: 0000 0000 0000 0000 8: 0000 0000 0000 0000 9: 0000 0000 0000 0000
1
Initial Information
b7 b4 b3
Phase1 Restart is executed when initializing the system without disrupting the following two-way
Note:
connections that have already been established:
• Basic two-way connections (STN-STN, STN-TRK, TRK-TRK)
• Fixed connections
• Two-way connections established on a FCCS link
For more information, see Chapter 2
Default Grade
3
2
b0:
b1:
b2 b1 b0
b2:
b3:
b4:
INITIALIZATION PROCEDURE OF THE
Grade Modified
0/1 = IPL/PWR ON
0/1 = Load Key OFF/ON
0/1 = IPL KEY/PCPro INITIAL
0/1 = Program load/Non Program load
0/1 = -/Phase 1 Restart Note
– 281 –
CHAPTER 3 System Messages
Lamp Modified
SYSTEM.