Ccse Change Of Common Signaling Channel Equipment - NEC Univerge SV8500 Operation And Maintenance Manual

CCSE: Change of Common Signaling Channel Equipment
1. Functional Outline
This command is used to set/reset the make-busy state of CCH circuit card.
2. Parameters
LENS:
LINK:
MB:
Note: This command cannot be used for ISDN-related circuit card (such as PRT, DCH card).
Line Equipment Number of CCH circuit card [five digits]
MG=XX, UNIT=X, GROUP=XX
Link Status [0-2]
0=Link Open
1=Link Close
2=Not Available
Make-Busy Information [0-2]
0=Make Idle
1=Make Busy
2=Not Available
CHAPTER 7
– 735 –
Maintenance Commands