NEC Univerge SV8500 Operation And Maintenance Manual page 856

If any wrong data is input, error message "SP H/I Error (Error Code 0x0D05)" is displayed.
Note:
Output Data
(a) When 1: Internal Ether Traffic Data of IP Trunk Read is selected;
Frequency of:
Memory Error (CSR0)
Missed Frame (CSR0)
Collision Error
Send Timeout
Send Delay
Retry Once (Send Error)
Retry more than Once (Send Error)
Retry 16 times (Send Error)
Carrier Loss
Late Collision
FIFO Underflow
Buffer Error
Receive Buffer Error
CRC Error
FIFO Overflow
Framing Error
Jabber Error
Data Transfer Error
Send Timeout
RMDI-STP bit Error
Illegal Long Packet Receive Error
Target FPC Abnormal
No Routing Target
Send Waiting Queue Overflow
TTL Overflow
Transfer Error by Line Break
IP Header Checksum Error
Receive Frame Length NG (over 1500 bytes)
Receive LLC Data NG
User Data Area NG
Broadcast Packet (Receive)
Broadcast Packet (Send)
Average Length of Packet (Receive)
Average Number of Packet (Receive)
Maximum Length of Packet (Receive)
Minimum Length of Packet (Receive)
Average Length of Packet (Send)
Average Number of Packet (Send)
Maximum Length of Packet (Send)
Minimum Length of Packet (Send)
CHAPTER 7
– 809 –
Maintenance Commands