6-C: Line Load Control Start
Default Alarm
NON
This message displays when the CPU usage (occupancy) rate exceeds the value assigned to ASYD, SYS1,
INDEX 56, and the call origination from the pre-selected group of stations is restricted (i.e., Line Load Control
is set). This system message is always indicated as 0.
1: 0000 0000 0000 0000 2: 0000 0000 0000 0000 3: 0000 0000 0000 0000
4: 0000 0000 0000 0000 5: 0000 0000 0000 0000 6: 0000 0000 0000 0000
7: 0000 0000 0000 0000 8: 0000 0000 0000 0000 9: 0000 0000 0000 0000
Default Grade
3
– 260 –
CHAPTER 3
Grade Modified
System Messages
Lamp Modified