NEC Univerge SV8500 Operation And Maintenance Manual page 771

When DELETE is selected in the TYPE/KIND selection list box
Input Data
RT:
TK(START):
TK(END):
STEP:
Buttons
Execute:
Cancel:
Exit:
Output Data
TK:
STATUS:
In this parameter, specify the size of increment between the consecutive trunk numbers deleted. See the
Note 1:
example below:
Example:
INPUT DATA
TK(START)=1
TK(END)=21
STEP=2
When the deletion is successful, OK is displayed here. Otherwise (i.e. the deletion is rejected), related
Note 2:
error message is displayed.
Route Number
First Trunk Number [1-768]
Last Trunk Number [1-768]
Trunk Count-up Step [1-10]
Delete the input data.
Cancel the deletion.
Exit this command.
Trunk Number
Result of Deletion
OK=Deletion Successful
A Trunk Number is deleted by increments of 2:
CHAPTER 7
Note 1
Note 2
RESULT
– 724 –
Maintenance Commands