NEC Univerge SV8500 Operation And Maintenance Manual page 122

• SW01-2 (SYS SEL) on EMA card = Downward
• SW01-1 (SYS LOCK) on EMA card = OFF (Downward)
Normally,SW01 should be set to all OFF.
Note:
STEP 18 Switch over the CPU ACT/STBY to test the newly replaced CPU card.
• Use CMOD command from PCPro.
STEP 19 Make test calls to see that newly replaced CPU card is operating normally.
STEP 20 Attach the front cover again.
[End]
CHAPTER 2
– 75 –
Operations of SV8500 Server