Dicbd Display Of Individual Call Block Data - NEC Univerge SV8500 Operation And Maintenance Manual

DICBD: Display of Individual Call Block Data
1. Functional Outline
This command is used to display the information of Individual Call Block Data.
2. Parameters
Input Data
TYPE:
When "1: UGN/TELN" is selected in TYPE:
UGN:
TELN:
When "2: FPC/TN/STN" is selected in TYPE:
FPC:
TN:
STN
When "3: FPC/LENS" is selected in TYPE:
FPC:
LENS:
Output Data
CB ACT:
AN BLK ACT:
BIN NO:
DC:
Buttons
Select the item to input data.
1: UGN/TELN
2: FPC/TN/STN
3: FPC/LENS
Enter the User Group Number.
Enter the Telephone Number (Maximum 16 digits).
Enter the Fusion Point Code.
Enter the Tenant Number.
Enter the Station Number.
Enter the Fusion Point Code.
Enter the Equipment Number.
Call Block List
0: Inactive
1: Active
Anonymous Call Block
0: Inactive
1: Active
Bin Number [00-15]
Denial DC Number (Maximum 16 digits)
CHAPTER 7
– 795 –
Maintenance Commands