Chapter 14 Common Channel Inter-Office Signaling (Ccis) - NEC UNIVERGE NEAX 2000 IPS Reference Manual

Chapter 14 Common Channel Inter-Office
Signaling (CCIS)
The
U
NIVERGE
NEAX
Common Channel Inter-Office Signaling (CCIS). This functional and extremely flexible
"intelligent network" capability allows two or more
be networked together to provide feature transparency and to centralize many important
telecommunications functions such as Attendant Consoles, Call Accounting / Billing Systems,
Voice Processing Systems, Management systems, and Trunk Facilities, to name a few.
A variety of NEC's
together using CCIS, creating a proprietary corporate network. This network can serve multiple
company facilities in the same building or town, in different towns, in different states, and even
in different countries. Centralized services provide a great cost reduction in the initial system
hardware costs, ongoing maintenance costs, trunk and tie line costs and overall operations
costs. Feature transparency increases user productivity by providing a common numbering
plan for simplified on-net calling and a common feature package. Feature transparency allows
most features to be accessed using similar procedures throughout the local, national, or global
corporate network.
Alternate Routing capabilities provide increased network reliability, additional cost savings, and
increased user productivity. Based on the industry standard CCITT Signaling System #7,
which is the frame work for ISDN, CCIS offers 64k "Clear" channel voice/data transmissions.
The CCIS "Intelligent Network" can be configured to provide redundant signaling channels and
multiple alternate routing schemes for maximum network reliability. CCIS is so flexible it can be
used with standard digital T1 spans, analog tie lines, or satellite transmission systems.
The CCIS architecture is similar to ISDN. Both use 23B + D type trunks. Both networking types
conform to and comply with the Open Systems Interconnection (OSI) 7 Layer Model.
The
U
NIVERGE NEAX
CCIS Signaling (Analog/Digital), CCIS Networking via IP (non Peer-to-Peer connection), or via
IP (Peer-to-Peer connection). For adding No. 7 CCIS to the system, it is necessary to install
the 24 channel DTI (Digital Trunk Interface) for a digital network or LDT (Loop Dial Trunk)/ODT
(2 wire E&M or 4 wire E&M Trunk) for an analog network via a MODEM, and a PLO (Phase
Locked Oscillator) for network synchronization. Also, it is necessary to install a CCH (Common
Channel Handler). The CCH receives/transmits common signaling data to/from the distant
office. In each local office, the PBX can provide Centralized Billing function in addition to a
variety of inter-office service features. For addition of the Centralized Billing function, an AP
(Application Processor) is required when the
and Built-in SMDR when the
:
Note Centralized Day/Night Mode Change and Centralized Fault Message require CCIS No.7 networking with
the IPX.
UNIVERGE 2000 IPS Request For Proposal (RFP) Reference Guide
NEAX
Issue 6
2000 IPS offers a very powerful proprietary networking feature called
NIVERGE family of telecommunications systems can be networked
U
2000 IPS can be interfaced to another
U
NIVERGE
NIVERGE telecommunications systems to
U
U
NIVERGE
NEAX
2000 IPS is used as a tandem or local office.
NEAX
PBX by No. 7
U
NIVERGE NEAX
2000 IPS is the center office
Page 14-1