Table of Contents
Advertisement
Chapter 1 Installing Windows
3.6.6 Using RAID Controller (N8103-189/190/191/192/193/194/195/196/201/237/238)
For installation with the Rapid Setup or Manual installation, the drivers are installed by Standard Program
Package.
If you install the RAID controller (N8103-189/190/191/192/193/194/195/196/201/237/238) after installing
Standard Program Package, install driver by following steps.
1.
Insert the Starter Pack DVD into the optical disk drive.
2.
Run the \packages\cp055510.exe on the DVD to install the driver.
3.
After installing driver, restart the server.
3.6.7 Using 480GB SSD Adapter for OS Boot (N8103-239)
The driver for the 480GB SSD Adapter for OS Boot (N8103-239) is automatically installed by Windows
Plug-and-Play.
3.6.8 Using Fibre Channel Controller (N8190-163/164/165/166/171/172)
For installation with the Rapid Setup or Manual installation, the drivers are installed by Standard Program
Package.
If you install the Fibre Channel controller (N8190-163/164/165/166/171/172) after installing Standard Program
Package, install Standard Program Package again according to Chapter 1 (3.4 Standard Program Package
Installation).
Installation Guide (Windows Server 2019)
3. Installing Windows Server 2019
61
Advertisement
Table of Contents
