Intended Audience; General Precautions; Safety Precautions - Omron SYSMAC CPM2B-S001M-DRT Operation Manual

Intended Audience

1

Intended Audience

2

General Precautions

3

Safety Precautions

xii
Downloaded from Elcodis.com electronic components distributor
This manual is intended for the following personnel, who must also have
knowledge of electrical systems (an electrical engineer or the equivalent).
• Personnel in charge of installing FA systems.
• Personnel in charge of designing FA systems.
• Personnel in charge of managing FA systems and facilities.
The user must operate the product according to the performance specifica-
tions described in the operation manuals.
Before using the product under conditions which are not described in the
manual or applying the product to nuclear control systems, railroad systems,
aviation systems, vehicles, combustion systems, medical equipment, amuse-
ment machines, safety equipment, and other systems, machines, and equip-
ment that may have a serious influence on lives and property if used
improperly, consult your OMRON representative.
Make sure that the ratings and performance characteristics of the product are
sufficient for the systems, machines, and equipment, and be sure to provide
the systems, machines, and equipment with double safety mechanisms.
This manual provides information for programming and operating the Unit. Be
sure to read this manual before attempting to use the Unit and keep this man-
ual close at hand for reference during operation.
! W A R N I N G It is extremely important that a PC and all PC Units be used for the specified
purpose and under the specified conditions, especially in applications that can
directly or indirectly affect human life. You must consult with your OMRON
representative before applying a PC System to the above-mentioned applica-
tions.
! W A R N I N G Do not attempt to take any board apart while the power is being supplied.
Doing so may result in electric shock.
! W A R N I N G Do not touch any of the terminals, terminal blocks or, for the CPM2B-S, the
CPU board or expansion I/O board while the power is being supplied. Doing
so may result in electric shock.
! W A R N I N G When handling the Memory Backup Battery, never drop, disassemble, distort,
short-circuit, heat to a high temperature, or throw into fire. Otherwise the Bat-
tery may explode, catch fire, or leak fluid.
! W A R N I N G Do not attempt to disassemble, repair, or modify any Units. Any attempt to do
so may result in malfunction, fire, or electric shock.
1