Show Port-Vlan-Forwarding-Priority - Allied Telesis AT-x510-28GTX Command Reference Manual

VLAN C
OMMANDS
- -
SHOW PORT VLAN FORWARDING

show port-vlan-forwarding-priority

Overview Use this command to display the highest priority protocol that controls port-vlan
forwarding or blocking traffic. This command displays whether EPSR or Loop
Protection is set as the highest priority for determining whether a port forwards a
VLAN, as set by the
For more information about EPSR, see the
Configuration
show port-vlan-forwarding-priority
Syntax
Mode Privileged Exec
Example To display the highest priority protocol, use the command:
awplus#
Output Figure 15-1: Example output from the show port-vlan-forwarding-priority
Related port-vlan-forwarding-priority
Commands
C613-50102-01 REV C
-
PRIORITY
port-vlan-forwarding-priority
Guide.
show port-vlan-forwarding-priority
command
Port-vlan Forwarding Priority: EPSR
Command Reference for x510 Series
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
command.
EPSR Feature Overview and
499