Allied Telesis AT-x510-28GTX Command Reference Manual page 610

S T C
PANNING REE OMMANDS
-
SPANNING TREE PORTFAST BPDU
To enable STP BPDU filtering in Interface Configuration mode, enter the
commands:
awplus#
awplus(config)#
awplus(config-if)#
Related spanning-tree edgeport (RSTP and MSTP)
Commands
show spanning-tree
spanning-tree portfast (STP)
spanning-tree portfast bpdu-guard
C613-50102-01 REV C
-
FILTER
configure terminal
interface port1.0.2
Command Reference for x510 Series
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
spanning-tree portfast bpdu-filter enable
610