Allied Telesis AT-x510-28GTX Command Reference Manual page 807

R C
OUTING OMMANDS
SHOW IP ROUTE DATABASE
The routes added to the FIB are marked with a *. When multiple routes are
available for the same prefix, the best route is indicated with the > symbol. All
unselected routes have neither the * nor the > symbol.
These route entries denote:
•
•
If the static route becomes unavailable, then the device automatically selects the
OSPF route and installs it in the FIB.
Related maximum-paths
Commands
show ip route
C613-50102-01 REV C
S *> 10.10.34.0/24 [1/0] via 10.10.31.16, vlan2
O 10.10.34.0/24 [110/31] via 10.10.31.16, vlan2, 00:21:19
The same prefix was learned from OSPF and from static route configuration.
Since this static route has a lower administrative distance than the OSPF
route (110), the static route (1) is selected and installed in the FIB.
Command Reference for x510 Series
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
807