Allied Telesis AT-x510-28GTX Command Reference Manual page 874

RIP IP 6 C
NG FOR V OMMANDS
6 -
IPV RIP METRIC OFFSET
Examples To increment the metric-offset on the VLAN interface vlan2, enter the below
commands:
awplus#
awplus(config)#
awplus(config-router)#
awplus(config)#
awplus(config-if)#
To reset the metric-offset on the VLAN interface vlan2 to the default value, enter
the below commands:
awplus#
awplus(config)#
awplus(config-if)#
Validation show running-config
Commands
Related default-metric (IPv6 RIPng)
Commands
C613-50102-01 REV C
configure terminal
router ipv6 rip
exit
interface vlan2
ipv6 rip metric-offset 1
configure terminal
interface vlan2
no ipv6 rip metric-offset 1
Command Reference for x510 Series
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
874