Allied Telesis AT-x510-28GTX Command Reference Manual page 669

P E C
OWER OVER THERNET OMMANDS
-
SHOW POWER INLINE INTERFACE DETAIL
Table 4: Parameters in show power-inline interface detail command output
Related show power-inline
Commands
show power-inline interface
C613-50102-01 REV C
Parameter Description
Detection of
[Enabled|Disabled]
legacy
The status of legacy PoE detection on the PoE port, as configured
devices is
for the PoE port with the
Powered [Data|Spare]
pairs:
The IEEE 802.3af and IEEE 802.3at standards allow for either data
or spare twisted pairs to be used to transfer power to a PD.
The powered pairs status for each port. AlliedWare Plus™ PoE
switches implement IEEE 802.3af and IEEE 802.3at Endpoint PSE
Alternative A (Data).
Command Reference for x510 Series
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
power-inline allow-legacy command.
669