Allied Telesis AT-x510-28GTX Command Reference Manual page 515

VLAN C
OMMANDS
-
SWITCHPORT MODE PRIVATE VLAN TRUNK SECONDARY
To create isolated private VLAN 2 and then enable port1.0.3 in trunk mode as
Examples
a secondary port for the this VLAN with the group ID of 3, use the following
commands:
awplus#
awplus(config)#
awplus(config-vlan)#
awplus(config-vlan)#
awplus(config-vlan)#
awplus(config)#
awplus(config-if)#
awplus(config-if)#
awplus(config-if)#
group 3
To remove port1.0.3 in trunk mode as a secondary port, use the commands:
awplus#
awplus(config)#
awplus(config-if)#
secondary
Related switchport mode private-vlan trunk promiscuous
Commands
switchport mode trunk
switchport trunk allowed vlan
switchport trunk native vlan
show vlan private-vlan
C613-50102-01 REV C
configure terminal
vlan database
vlan 2
private-vlan 2 isolated
exit
interface port1.0.3
switchport mode trunk
switchport trunk allowed vlan add 2
switchport mode private-vlan trunk secondary
configure terminal
interface port1.0.3
no switchport mode private-vlan trunk
Command Reference for x510 Series
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
515