Debug Rip - Allied Telesis AT-x510-28GTX Command Reference Manual

RIP C
OMMANDS

DEBUG RIP

debug rip
Overview Use this command to specify the options for the displayed debugging information
for RIP events and RIP packets.
Use the no variant of this command to disable the specified debug option.
Syntax debug rip {events|nsm|<packet>|all}
no debug rip {events|nsm|<packet>|all}
Default Disabled
Mode Privileged Exec and Global Configuration
Example The following example displays information about the RIP packets that are
received and sent out from the device.
awplus#
Related undebug rip
Commands
C613-50102-01 REV C
Parameter Description
events
RIP events debug information is displayed.
nsm
RIP and NSM communication is displayed.
<packet> packet [recv|send] [detail] Specifies RIP packets only.
recv
Specifies that information for received packets be displayed.
send
Specifies that information for sent packets be displayed.
detail
Displays detailed information for the sent or received packet.
all
Displays all RIP debug information.
debug rip packet
Command Reference for x510 Series
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
820