Allied Telesis AT-x510-28GTX Command Reference Manual page 281

S C M
YSTEM ONFIGURATION AND
-
SHOW TECH SUPPORT
Default Captures all information for the device.
By default the output is saved to the file 'tech-support.txt.gz' in the current
directory. If this file already exists in the current directory then a new file is
generated with the time stamp appended to the file name, for example
'tech-support20161009.txt.gz', so the previous file is retained.
Usage This command is useful for collecting a large amount of information about all
protocols or specific protocols on your device so that it can then be analyzed for
troubleshooting purposes. The output of this command can be provided to
technical support staff when reporting a problem.
Mode Privileged Exec
Examples To produce the output needed by technical support staff, use the command:
awplus#
C613-50102-01 REV C
C
ONITORING OMMANDS
Parameter Description
ripng
Display RIPNG specific information
stack
Display stacking device information
stp
Display STP specific information
system
Display general system information
tacacs+
Display TACACS+ information
update
Display resource update specific information
|
Output modifier
>
Output redirection
>>
Output redirection (append)
outfile
Output file name
<filename>
Specifies a name for the output file. If no name is specified, this file
will be saved as: tech-support.txt.gz.
show tech-support
Command Reference for x510 Series
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
281