Feature Licensing Commands; Introduction - Allied Telesis AT-x510-28GTX Command Reference Manual

4

Introduction

Overview This chapter provides an alphabetical reference for each of the Feature Licensing
commands. Feature Licensing enables you to use advanced features such as Layer
3 routing.
To see which Feature Licenses are available for your device, see the
Datasheet.
With Software Version 5.4.6-1.x and later, new installations of Allied Telesis
Management Framework (AMF) require a Subscription License instead of a Feature
License. For information about Subscription Licensing commands, see the
Subscription Licensing Commands chapter.
Note that existing AMF Feature Licenses (purchased prior to 5.4.6-1.x) will still
operate with 5.4.6-x.x.
For step-by-step instructions about how to license AlliedWare Plus devices, see the
Licensing Feature Overview and
Command List •
•
•
•
•
C613-50102-01 REV C
Feature Licensing
"license" on page 194
"show license" on page 196
"show license brief" on page 198
"show license brief member" on page 200
"show license member" on page 202
Command Reference for x510 Series
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
Commands
Configuration_Guide.
AlliedWare Plus
193