Show Mirror - Allied Telesis AT-x510-28GTX Command Reference Manual

P M R
ORT IRRORING AND EMOTE

SHOW MIRROR

show mirror
Overview Use this command to display the status of all mirrored ports.
show mirror
Syntax
Mode User Exec and Privileged Exec
Example To display the status of all mirrored ports, use the following command:
awplus#
Output Figure 12-1: Example output from the show mirror command
C613-50102-01 REV C
M C
IRRORING OMMANDS
show mirror
Mirror Test Port Name: port1.0.1
Mirror option: Enabled
Mirror direction: both
Monitored Port Name: port1.0.2
Mirror Test Port Name: port1.0.3
Mirror option: Enabled
Mirror direction: receive
Monitored Port Name: port1.0.4
Mirror Test Port Name: port1.0.3
Mirror option: Enabled
Mirror direction: receive
Monitored Port Name: port1.0.1
Mirror Test Port Name: port1.0.1
Mirror option: Enabled
Mirror direction: receive
Monitored Port Name: port1.0.3
Mirror Test Port Name: port1.0.1
Mirror option: Enabled
Mirror direction: transmit
Monitored Port Name: port1.0.4
Command Reference for x510 Series
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
411