RIP C
OMMANDS
ROUTER RIP
router rip
Overview
Use this global command to enter Router Configuration mode to enable the RIP
routing process.
Use the no variant of this command to disable the RIP routing process.
Syntax
router rip
no router rip
Mode
Global Configuration
Example
This command is used to begin the RIP routing process:
awplus#
awplus(config)#
awplus(config-router)#
awplus(config-router)#
awplus(config-router)#
awplus(config-router)#
Related
network (RIP)
Commands
version (RIP)
C613-50102-01 REV C
configure terminal
router rip
version 1
network 10.10.10.0/24
network 10.10.11.0/24
neighbor 10.10.10.10
Command Reference for x510 Series
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
854