IP A
P
DDRESSING AND
ROTOCOL
SHOW IP TRAFFIC
show ip traffic
Overview
Use this command to display statistics regarding IP traffic sent and received by all
interfaces on the device, showing totals for IP and IPv6 and then broken down into
sub-categories such as TCP, UDP, ICMP and their IPv6 equivalents when
appropriate.
For information on filtering and saving command output, see the
with AlliedWare Plus" Feature Overview and Configuration
show ip traffic
Syntax
Mode
Privileged Exec
Example
To display IP traffic statistics, use the command:
awplus#
Output
Figure 20-8: Example output from the show ip traffic command
C613-50102-01 REV C
C
OMMANDS
show ip traffic
IP:
261998 packets received
261998 delivered
261998 sent
69721 multicast packets received
69721 multicast packets sent
23202841 bytes received
23202841 bytes sent
7669296 multicast bytes received
7669296 multicast bytes sent
IPv6:
28 packets discarded on transmit due to no route
ICMP6:
UDP6:
UDPLite6:
TCP:
0 remote connections established
40 local connections established
7 remote listening ports
7 local listening ports
261 active connection openings
247 passive connection openings
14 connection attempts failed
122535 segments received
122535 segments transmitted
14 resets transmitted
227 TCP sockets finished time wait in fast timer
Command Reference for x510 Series
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
"Getting Started
Guide.
729