Allied Telesis AT-x510-28GTX Command Reference Manual page 256

S C M
YSTEM ONFIGURATION AND
SHOW ECOFRIENDLY
Table 3: Parameters in the output of the show ecofriendly command (cont.)
Related ecofriendly led
Commands
ecofriendly lpi
C613-50102-01 REV C
C
ONITORING OMMANDS
Parameter
off (configuration
overridden by eco
button)
Port
Name
Configured
Status
Command Reference for x510 Series
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
Description
The eco-friendly LED feature has been enabled with
the eco-switch button, overriding the configuration
set with the ecofriendly led
port LEDs is disabled.
Displays the port number as assigned by the switch.
Displays the port name if a name is configured for a
port number.
The eco-friendly LPI feature is configured on the port.
Either LPI or off is displayed.
The eco-friendly LPI feature is active on the port.
Either LPI or off is displayed. Ports that are not
running show a dash (-).
command. Power to the
256