Allied Telesis AT-x510-28GTX Command Reference Manual page 496

VLAN C
OMMANDS
- - -
PORT VLAN FORWARDING PRIORITY
To prioritize Loop Protection over EPSR or MAC Thrashing protection settings, so
that EPSR or MAC Thrashing protection cannot set a port to the forwarding state a
VLAN if Loop Protection has set it to the blocking state, use the commands:
awplus#
awplus(config)#
To set EPSR, Loop Protection, and MAC Thrashing protection protocols to have
equal priority for port forwarding and blocking, which allows the protocols to
override each other to set a port to the forwarding or blocking states, use the
commands:
awplus#
awplus(config)#
To restore the default highest priority protocol back to the default of EPSR, use the
commands:
awplus#
awplus(config)#
Related show port-vlan-forwarding-priority
Commands
C613-50102-01 REV C
configure terminal
port-vlan-forwarding-priority loop-protection
configure terminal
port-vlan-forwarding-priority none
configure terminal
no port-vlan-forwarding-priority
Command Reference for x510 Series
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
496