User Access Commands; Introduction - Allied Telesis AT-x510-28GTX Command Reference Manual

3

Introduction

Overview This chapter provides an alphabetical reference of commands used to configure
user access.
Command List •
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
C613-50102-01 REV C
"clear line console" on page 155
"clear line vty" on page 156
"enable password" on page 157
"enable secret" on page 160
"exec-timeout" on page 163
"flowcontrol hardware
"length (asyn)" on page 167
"line" on page 168
"privilege level" on page 170
"security-password history" on page 171
"security-password forced-change" on page 172
"security-password lifetime" on page 173
"security-password minimum-categories" on page 174
"security-password minimum-length" on page 175
"security-password reject-expired-pwd" on page 176
"security-password warning" on page 177
"service advanced-vty" on page 178
"service password-encryption" on page 179
"service telnet" on page 180
"service terminal-length
Command Reference for x510 Series
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
User Access
Commands
(asyn/console)" on page 165
(deleted)" on page 181
153