Allied Telesis AT-x510-28GTX Command Reference Manual page 137

F C M
ILE AND ONFIGURATION ANAGEMENT
SHOW BOOT
Table 1: Parameters in the output of the show boot command (cont.)
Related autoboot enable
Commands
boot config-file backup
boot system backup
show autoboot
C613-50102-01 REV C
C
OMMANDS
Parameter
Backup boot config
Autoboot status
Command Reference for x510 Series
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
Description
The configuration file to use during the next boot cycle if
the main configuration file cannot be loaded.
The status of the Autoboot feature; either enabled or
disabled.
137